5-AXIS PART IMAGEComplex housing · 1:1
Complex Housings
AL7075 · 5-Axis CNC · Hard Anodized
5-AXIS CNC MACHINING
Complex Geometry. Fewer Setups. Higher Positional Accuracy.
5-axis CNC machining for complex parts with multi-face features, compound angles and tight positional relationships.
±0.01 mmTight Tolerance Capability
5-Side MachiningFewer Setups
Metal + PlasticsMachined Materials
Tolerance capability depends on feature geometry, material, part size and inspection requirements.
5-AXIS HERO PART PLACEHOLDERComplex integrated housing / structural partMulti-face machining · compound angles · deep pockets
Recommended image ratio: 4:5
Recommended image ratio: 4:5
TYPICAL PARTS
Parts We’ve Machined
A selection of parts we have produced using 5-axis CNC machining across complex geometries, materials and finishing requirements.
5-AXIS PART IMAGEMulti-face structural part · 1:1
Multi-Face Structural Parts
Stainless Steel · 5-Axis Machining · Passivated
5-AXIS PART IMAGEAngled feature component · 1:1
Angled Features & Hole Patterns
AL6061 · 5-Axis CNC · Angled Drilling
5-AXIS PART IMAGECurved / contoured component · 1:1
Curved / Contoured Components
Titanium · 5-Axis Machining · Complex Contour
5-AXIS PART IMAGEHigh-precision fixture · 1:1
High-Precision Fixtures
Tool Steel · 5-Axis CNC · Critical Datums
5-AXIS PART IMAGEIntegrated component · 1:1
Integrated Components
PEEK · 5-Axis Machining · Functional Part
WHY 5-AXIS MACHINING
COMPLEX 5-AXIS PART PLACEHOLDERMulti-face geometry with compound feature accessRecommended: close-up of a visibly complex machined component
Fewer Setups
Machining more features in one controlled setup reduces repeated repositioning and handling.
Better Positional Relationships
Features on different faces can be machined within the same setup, helping reduce accumulated setup error.
Access to Complex Angles
Suitable for angled holes, compound surfaces, tilted features and geometry that is difficult to reach with standard setups.
Less Dedicated Fixturing
Complex parts may require fewer custom fixtures, helping simplify the machining process and improve repeatability.
5-AXIS MACHINING CAPABILITY
- Standard Tolerance
- ±0.05 mm
- Tight Tolerance
- Down to ±0.01 mm on selected features
- Multi-Face Machining
- Up to 5 sides in one controlled setup where geometry allows
- Angled Features
- Compound angles, angled holes and tilted surfaces
- Positional Relationships
- Critical features across multiple faces can be machined within one controlled setup where geometry allows
- Maximum Part Size
- TBD — waiting for actual machine travel
- Maximum Part Weight
- TBD — waiting for actual machine capacity
- Hole & Thread Capability
- Metric / UNC / UNF / NPT / custom requirements
- Materials
- Aluminum / Stainless Steel / Steel / Titanium / Copper / Brass / Engineering Plastics
- Production Volume
- From 1 piece to repeat production
5-AXIS DETAIL PLACEHOLDERAngled bore, compound face and contour detailRecommended: close-up part detail · 4:5
INSPECTION FOCUS
5-AXIS INSPECTION PLACEHOLDERCMM inspection across multiple machined facesDatum alignment · angular verification · profile measurement
Multi-Face Positional Accuracy
Inspection of relationships between features located on different machined faces.
Angular Features
Verification of angled holes, inclined faces, compound angles and tilted features.
True Position & Hole Location
Inspection of critical hole positions, hole patterns and datum-related locations.
Datum Relationships
Verification of dimensional and geometric relationships between multiple datum surfaces.
Profile & Contour Verification
Inspection of complex profiles, contours and freeform surfaces where required.
Post-Finishing Critical Dimensions
Critical dimensions and mating features rechecked after anodizing, plating, coating or painting where required.
Inspection focuses on the relationships between features across multiple faces — not only on individual dimensions.
MATERIALS & FINISHES
01 / MATERIAL OPTIONS
Common Materials
- Aluminum
- Stainless Steel
- Steel
- Titanium
- Copper & Brass
- Engineering Plastics
02 / SECONDARY OPERATIONS
Finishing Support
- Anodizing
- Hard Anodizing
- Bead Blasting
- Polishing
- Plating
- Passivation
- Powder Coating
- Painting
RFQ / DRAWING REVIEW
Have a Complex Part for 5-Axis Machining?
Send us your 2D and 3D files for manufacturability review, process evaluation and quotation.
STEP · STP · IGES · X_T · PDF · DWG · DXF